Steps to go from an old deck to a new one

We all love spending time with our friends and families on the deck, having a barbeque, some drinks, or enjoying the nice, warm weather. Before doing that you may want to make sure your deck is in good condition and safe for your family. 

Bringing your deck back to life is not an easy task, especially when you have to take into consideration the repercussions of the humid climate of Boston and its surrounding areas. 

Whether you decide to start looking for deck repair contractors in Massachusetts or take on a lengthy DYI project, we think you should know the four stages of deck renovation and what they entail.

Step 1: Inspections & Making Repairs

First thing first, you need to assess the state of your deck. Make sure there is no rot or insect damage. Pay special attention to the bottom of the deck where it touches the ground. Because of the humidity, that area is most prone to be problematic. Take a sharp tool, like a screwdriver, and poke it into the post or joint. If it sinks in, you’re probably due for deck restoration. 

Take a little walk around the perimeter of your deck and inspect any missing nails, screws, and bolts. If anything is missing you can replace it. If there is considerable moisture damage, rot, and boards that need to be replaced, we suggest you look for professional deck repair services in MA

Step 2: Cleaning the surface

Following the proper maintenance protocol means cleaning the deck at least once a year with the right products. Choose a safe cleaning product that will not damage the deck or your plants. You should be able to apply the product using the integral applicator that comes with it and a regular garden hose. Once it’s applied, you need to work the product into the wood with a brush. 

Don’t forget to wear safety equipment, like glasses and gloves when you work with chemicals. Depending on the chemicals you decide to use, you may have to cover your plants with a plastic sheet. 

Here is a recipe for an all-purpose deck cleaner with ingredients everybody has in their households:

  1. Use 1 gallon of warm water
  2. 1 cup of  powdered laundry detergent (make sure it does not contain bleach)
  3. 3/4 cup of oxygen bleach (optional but good to use if mildew stains are present)

Always allow the deck to dry off completely before applying deck stain on it. Don’t forget that if you take good care of your deck yearly, you will delay having to pay professionals for a deck replacement and enjoy your outdoor hangout place for years to come. 

Step 3: Applying the stain

Now that your deck is clean and completely dried off you can apply a protective finish. For a newer deck is recommended a clear stain, whereas for an older deck – a semi-transparent one. 

Professionals recommend using a sprayer and a 2-inch brush to apply the stain. Spray a generous amount and then use the brush to get rid of the puddles. Make sure the stain is not too thick. If you plan on applying multiple coats, do that before the previous one dries off. If the stain is not still wet the new coat will not absorb into the wood.

You should do this once every other year if you wish to preserve your deck for a long time. If you don’t feel up to this task, or simply don’t have enough time and confidence to do it, we suggest getting professional deck staining services.

Step 4: Redoing the railing

Depending on the shape of your deck, you may or may not need to replace the railing system. They are available in pre-made panels or as kits and come with detailed instructions. 
Deck repair and restoration is not an easy task, it requires a lot of patience, knowledge, care, and time. You and your family deserve to spend those nice summer nights together on a beautiful and safe deck. Contact professionals to take care of your deck house renovation in Massachusetts.